files-description, .files_description (Groomix.info) Microcontrollers-ATmega48-V, ATmega88-VA and ATmega168-V microcontroller datasheet (8 bit microcontroller, AVR family, 32KB ROM, 2KB RAM and 1KB EEPROM)
Microcontrollers
Connection-Guides
Microcontrollers
Operational-Amplifiers-ICs
Software-For-PC
File Category: Microcontrollers

ATmega48-V, ATmega88-VA and ATmega168-V microcontroller datasheet (8 bit microcontroller, AVR family, 32KB ROM, 2KB RAM and 1KB EEPROM)

ATmega48-V, ATmega88-VA and ATmega168-V microcontroller Ttmel brand microcontrollers. Post-fixed "V" indicate that its voltahe range is 1.8 - 5.5V . and without "V" is 2.5 - 5.5V .

Features
• High Performance, Low Power AVR® 
8-Bit Microcontroller
• Advanced RISC Architecture
– 131 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20 MHz
– On-chip 2-cycle Multiplier
• Non-volatile Program and Data Memories
– 4/8/16K Bytes of In-System Self-Programmable Flash (ATmega48/88/168)
Endurance: 10,000 Write/Erase Cycles
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation 
– 256/512/512 Bytes EEPROM (ATmega48/88/168)
Endurance: 100,000 Write/Erase Cycles
– 512/1K/1K Byte Internal SRAM (ATmega48/88/168)
– Programming Lock for Software Security
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture 
Mode
– Real Time Counter with Separate Oscillator
– Six PWM Channels
– 8-channel 10-bit ADC in TQFP and MLF package
– 6-channel 10-bit ADC in PDIP Package
– Programmable Serial USART
– Master/Slave SPI Serial Interface
– Byte-oriented 2-wire Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated Oscillator
– External and Internal Interrupt Sources
– Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and 
Standby
• I/O and Packages
– 23 Programmable I/O Lines
– 28-pin PDIP, 32-lead TQFP and 32-pad MLF
• Operating Voltage:
– 1.8 - 5.5V for ATmega48V/88V/168V
– 2.7 - 5.5V for ATmega48/88/168
• Temperature Range:
–-40°C to 85°C
• Speed Grade:
– ATmega48V/88V/168V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V
– ATmega48/88/168: 0 - 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V
• Low Power Consumption
– Active Mode: 
1 MHz, 1.8V: 240µA
32 kHz, 1.8V: 15µA (including Oscillator)
– Power-down Mode: 
0.1µA at 1.8V

Click below button to download file

Go to top

Legal Links

  • Privacy Policy
  • Terms & Conditions
  • Return, Refund and Cancellation Policy
  • Shipping Policy
  • Disclaimer
  • Important Links

  • Contact Us
  • About Us
  • All copyright © 2020 are reserved by Groomix - designed by Groomix